# KLL update for RPI2B cpu
echo "____cpu "
cat /proc/cpuinfo
echo "____cpu temp"
vcgencmd measure_temp
echo "____list HZ"
for src in arm core h264 isp v3d uart pwm emmc pixel vec hdmi dpi ; do \
echo -e "$src:\t$(vcgencmd measure_clock $src)" ; \
done
echo '____RPI2 min, cur, max'
sudo cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq
sudo cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
sudo cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq

echo "____core volt"
vcgencmd measure_volts core
echo "____free mem"
free -o -h
echo "____list codec"
for codec in H264 MPG2 WVC1 MPG4 MJPG WMV9 ; do \
echo -e "$codec:\t$(vcgencmd codec_enabled $codec)" ; \
done
echo '____debian version'
lsb_release -sr
echo '____build'
cat /proc/version
echo "____cmdline.txt"
cat /boot/cmdline.txt
echo "____config.txt"
cat /boot/config.txt | grep -v -e "^$" -e "#"
echo '____USB'
lsusb
echo '____partitions'
lsblk
echo '____SDcard'
#for src in cid csd scr date fwrev hwrev manfid name oemid serial erase_size preferred_erase_size type uevent ; do \
#echo -e "$src:\t$(cat  /sys/block/mmcblk0/device/$src)" ; \
#done
# https://www.sdcard.org/downloads/pls/part1_410.pdf deep info
# http://softgun.sourceforge.net/sdcard.shtml
# https://wiki.linaro.org/WorkingGroups/KernelArchived/Projects/FlashCardSurvey?action=show&redirect=WorkingGroups%2FKernel%2FProjects%2FFlashCardSurvey
call='cat /sys/block/mmcblk0/device/'
for src in type date fwrev hwrev manfid name oemid serial ; do \
echo -e "$src:\t$($call$src)" ; \
done
# end